Get Personal
Enhance
Whether you want a holographic, metallic, or gloss finish on your media, the LD-80 is compatible with a wide variety of foils with different textures and colors for a myriad of unique personalization results.
Traditional foil stamping technology uses high heat and pressure which can damage the material being marked. DGSHAPE Laser Decorating technology can imprint adhesive backed foils on to paper and soft plastics without any damage to the substrate.
Ease of Use
The yellow thermal application sheet easily swings back and forth to load materials in seconds.
The LD-300 Laser Decorator was completely re-designed to accommodate large items such as handbags and gift boxes* with increased speed. Flat, A4 sized items (305mm×230mm) can be decorated with ease; and if you remove the print table, the available decorating area expands to 200mm thick!
*Depending on the height of the box, a spacer may be required for adjustment. You may also need to support the inside of the box to prevent the surface of the box from sinking or creasing.
Advanced Technology
Light Amplified Select Emission Radiation sounds fancy doesn’t it? Well, we took the fancy and put it to good use making even fancier items with our Laser Decorator line of products.
Using a semiconductor laser, combined with our revolutionary motion control firmware, our laser decoration technology transfers metallic foil to promotional products which can be very difficult with conventional hot-foil stamping technology. The laser focuses heat to activate the adhesive on these foils, only in the areas needed, to decorate logos and text on a variety of different materials.
This is where the real magic happens.
DGSHAPE’s proprietary technology focuses the bue light from the diode laser into heat at the exact resolution needed to activate the adhesive in the metallic foil.
Leather
Our patent pending technology, first pioneered with the LD-80, uses foil transfer for decoration on synthetic leather. With the LD-300, the same technology can also imprint directly onto the surface of genuine* leather. Produce multiple items at once or create unique masterpieces one at a time. Unlike CO2 lasers, DGSHAPE’s semi-conductor laser decoration technology emits no gas or odors commonly associated with laser engraving applications or fume extraction equipment. All while delivering crisp text, fine lines, and highly detailed artwork.
* Please use genuine leather processed with plant-based tanning when transferring and stamping. Other types of treated leather will produce inconsistent results. In addition, please note that synthetic leather cannot be printed directly.
Traditional leather decoration using laser needs adequate ventilation. DGSHAPE laser technology is safe for office or retail environments.
BUNDLED SOFTWARE
Interested in a DWX? Reach out and our team will contact you as soon as possible!
Chat with our dedicated team for support with your DWX machines and DGSHAPE CLOUD.
Copyright © 2024 DGSHAPE A Roland DG Group Company
このサイトは日本国内の歯科医師、歯科技工士および歯科衛生士等の歯科医療関係者を対象にしたものであり、一般の方や国外の歯科医療関係者に対する情報提供のサイトではありません。