Hybrid 5-Axis WET & DRY Dental Milling Machine
Advantages of Choosing the DWX-70WD
Labs that have built their digital workflow with the DWX series are now ready to take on a wider range of applications. The DWX-70WD, flagship of the DWX series, is a 5-axis wet & dry dental milling machine that expands into titanium and cobalt-chrome disc milling while inheriting the high quality, intuitive operability, and comprehensive support cultivated by the DWX series.
With a cast-iron, high-rigidity frame, enhanced spindle performance, milling burs designed exclusively for the DWX-70WD, and a built-in control panel and camera, it delivers stable, high-quality results across a wide range of materials and applications, elevating your laboratory’s capabilities and productivity to the next level.
5-Axis WET & DRY Milling
Titanium & Co-Cr Disc Milling
High-Rigidity
Built-in Control Panel
Built-in Camera
Remote Monitoring
Millable Materials
Discover the Variety of Materials You Can Mill with Your New DWX-70WD.
WET MILLING
Milling with coolant
- Titanium alloy
- Composite resin
- Glass ceramics
- Glass-fiber-reinforced resin
DRY MILLING
Milling with dust extraction
- Cobalt-chromium alloy
- Wax
- PEKK
- CoCr sinter metal
- PMMA
- Polycarbonate
- Zirconia
- PEKK
Millable Applications
Discover the Range of Applications You Can Create with Your DWX-70WD.
From crowns and bridges to full-arch frameworks, implant bars and custom abutments, the DWX-70WD covers a wide range of applications in both wet and dry milling with a single machine.
Enhanced machine rigidity and spindle performance, combined with milling burs specifically designed for the DWX-70WD, enable high-quality milling and superior surface finish across a wide range of materials and applications.
Millable Material
Discover the Variety of Materials You Can Mill with Your New DWX-70WD.
WET MILLING
Milling with coolant
- Titanium alloy
- Composite resin
- Glass ceramics
- Glass-fiber-reinforced resin
DRY MILLING
Milling with dust extraction
- Cobalt-chromium alloy
- Wax
- PEKK
- CoCr sinter metal
- PMMA
- Polycarbonate
- Zirconia
- PEEK
Millable Applications
Discover the Range of Applications You Can Create with Your DWX-70WD.
From crowns and bridges to full-arch frameworks, implant bars and custom abutments, the DWX-70WD covers a wide range of applications in both wet and dry milling with a single machine.
Enhanced machine rigidity and spindle performance, combined with milling burs specifically designed for the DWX-70WD, enable high-quality milling and superior surface finish across a wide range of materials and applications.
- Inlay
- Denture Frame
- Implant Bar
- Onlay
- Partial Denture Frame
- Full-Arch Frame

Implant Bar

Full-Arch Frame

Custom Abutment

Crown

Bridge

Veneer
Millable
Applications

Occlusal Splint
and Bites

Surgical Guide

Removable Dental
Prostheses

Veneer

Toronto Bridge

Bridge

Overlay

Onlay

Inlay

Implant Bar

Crown

Copings
I believe that the key advantages of DWX-53DC are precision and speed.
The ability to achieve unprecedented precision while the DWX milling machine is at work allows us to advance with other tasks simultaneously.
Alessandro e Daniele De Sole Dental Lab– Dental Lab
Highlights
High-Rigidity Frame
The machine’s main components are constructed from cast iron, providing enhanced structural rigidity and ensuring stable operation even under high-load milling conditions.
In addition, the integrated machine base and body lower the overall center of gravity, minimizing vibration and improving machining stability for a smoother, higher-quality surface finish.
The integrated base can also be fitted with casters, making installation and layout changes easier.
Titanium & Co-Cr Disc Milling
Enhanced machine rigidity and spindle performance, together with milling burs designed exclusively for the DWX-70WD, enable the milling of titanium and cobalt-chrome disc materials.
Produce implant bars, full-arch frameworks and partial denture frames, applications that previous DWX models could not handle.
Wet & Dry in One Machine
Switch between wet and dry milling on a single machine. The detachable 15-station milling bur magazine lets you keep dedicated tools for each mode, saving time on tool changes and cleaning when switching.
In dry milling, steps and banding in zirconia are eliminated, and zirconia milling time is reduced by up to 30% compared with the DWX-53D.
Built-in Control Panel & Camera
The control panel with the updated VPanel is integrated into the main unit for a space-saving design and streamlined workflow. There is no need to place a separate PC for VPanel near the machine.
A built-in camera captures the milling process, allowing you to verify correct material and milling bur installation. Should an error occur, the situation at the time can be visually inspected, aiding in the identification of the cause.
Easy Maintenance Design
The machining area cover is automatically cleaned with coolant flushed from the inside, and the sloped machining area makes milling waste easy to collect.
A dedicated tool for cleaning the spindle interior is included for collet maintenance, and a cover on the tool magazine helps reduce tool change errors caused by milling waste.
High-Rigidity Frame
The machine’s main components are constructed from cast iron, providing enhanced structural rigidity and ensuring stable operation even under high-load milling conditions.
In addition, the integrated machine base and body lower the overall center of gravity, minimizing vibration and improving machining stability for a smoother, higher-quality surface finish.
The integrated base can also be fitted with casters, making installation and layout changes easier.
Titanium & Co-Cr Disc Milling
Enhanced machine rigidity and spindle performance, together with milling burs designed exclusively for the DWX-70WD, enable the milling of titanium and cobalt-chrome disc materials.
Produce implant bars, full-arch frameworks and partial denture frames, applications that previous DWX models could not handle.
Wet & Dry in One Machine
Switch between wet and dry milling on a single machine. The detachable 15-station milling bur magazine lets you keep dedicated tools for each mode, saving time on tool changes and cleaning when switching.
In dry milling, steps and banding in zirconia are eliminated, and zirconia milling time is reduced by up to 30% compared with the DWX-53D.
Built-in Control Panel & Camera
The control panel with the updated VPanel is integrated into the main unit for a space-saving design and streamlined workflow. There is no need to place a separate PC for VPanel near the machine.
A built-in camera captures the milling process, allowing you to verify correct material and milling bur installation. Should an error occur, the situation at the time can be visually inspected, aiding in the identification of the cause.
Easy Maintenance Design
The machining area cover is automatically cleaned with coolant flushed from the inside, and the sloped machining area makes milling waste easy to collect.
A dedicated tool for cleaning the spindle interior is included for collet maintenance, and a cover on the tool magazine helps reduce tool change errors caused by milling waste.
VPanel for DWX
With VPanel you can control your milling machine.
Monitor tool use and set notifications so you know when milling jobs are done, operations are completed, or when an error has occurred, so you can save time for other jobs.
VPanel has a very user friendly interface, that allows you to use it in the best way.
Fully leverage your experience with DGSHAPE through DGSHAPE CLOUD, an advanced cloud service provided by DGSHAPE.
Accessible via your DGSHAPE Account, it grants you access to Insights, a tool for remotely monitoringyour CAD/CAM milling devices and supporting your business.
Technical Information
460 kg (1,014 lbs.)
Width 720 mm (28.3 in.) x Depth 785 mm (30.9 in.) x Height 1,785 mm (70.3 in.)
Disc-type
Step section 98.5 mm (3.8 in.) diameter, 10 ±0.3 mm (0.39 in.) height
Body section less than 95 mm (3.74 in.) diameter, 35 mm (1.38 in.) max. height
Pin-type
Pin diameter 6 mm (0.24 in.), number of loadable workpieces: 6
Loadable workpiece weight
Up to 1,650 g (3.64 lbs.)
Number of loadable adapters: 1
Operating speed: XYZ axis 6,000 mm/min (236.2 in/min), A/B axis 15 / 7.5 rpm
Spindle rotating speed: 10,000 to 60,000 rpm
Spindle output: Rated 650 W (peak 1.6 kW)
Rotary axis travel angle: A ±360°, B ±35°
Up to 15 pieces (+1 dummy pin)
Shank diameter: 6 mm (0.24 in.)
Length: max. 75 mm (2.95 in.) (collet gripping margin: 17 mm (0.67 in.))
DGSHAPE genuine milling burs only
Interface: LAN (USB connection is for service and emergency use only)
Control command sets: RML-1, NC code
Power requirements: AC 100 V to 240 V ±10%, 50/60 Hz (overvoltage category II, IEC60664-1), 4 A
Power consumption: 350 W
ZMA-70 Disc-type material adapter (additional / replacement set of 3)
ZV-70 Pin-type material adapter (holds up to 6 blocks)
AK-70-DE / AK-70-GE / AK-70-ME / AK-70-NT Custom abutment adapter (DESS / GeoMedi / MEDENTiKA / Dental)
ZC-70 Replacement collet
ZM-70 Additional / replacement milling bur magazine
ZR-70 Adapter rack for up to 8 adapters
DGSHAPE Genuine Milling Burs for DWX-70WD
*1 Even when made from the described materials, some workpieces cannot be milled due to specifications or physical properties.
*2 Operation of this product requires a coolant additive, chiller, dust collector, air compressor, milling burs (sold separately) and internet connection. Please contact your dealer for details.
This profit simulation tool is designed for those considering the installation of DWX Series dental milling machines. By simply entering equipment costs, material expenses, and expected monthly production volume, you can easily calculate your payback period and monthly profit forecasts.
Quick Feature Overview
Frequently Asked Questions
The major difference between the DWX-70WD and the conventional DWX series is that it supports cutting of metal discs (CoCr, Titanium).
It can produce applications such as implant bars and telescope crowns.
A machine that supports both wet and dry processing offers greater flexibility and allows us to work with a wider range of materials.
It encourages that milling work would be consolidated into the DWX-70WD.
It supports processing of pre-milled abutments from GeoMedi, Medentika, DESS, and NT Dental.
MillBox and hyperDENT are supported.
Please contact your authorized dealer for details.
One of the strengths of DGSHAPE dental milling machines is their ease of use, from calibration to maintenance.
We at DGSHAPE do not directly provide courses, but usually, it’s our trained dealers who offer assistance and courses from the initial installation.
Please, contact your authorized dealers for further information and support.
In addition, DGSHAPE has direct subsidiaries in the main countries where it operates, ensuring comprehensive support in the local language.
Contact Us
Demo
Would you like to request a free demo?
Fill out our form to discover the best
solution for your business.
Quote
Are you interested in one of our dental milling machines?
Fill out the form and we’ll send you a quote.
Consultation
Do you want to speak with our experts?
Fill out the form and we’ll contact you as soon as possible.
Our DGSHAPE authorized dealers are carefully selected, and offer superior expertise and tailored advice across a range of DGSHAPE products and services
By filling out the form, we ensure
- Quick dealer contact
- Expert dealer matching for your country
- Time-saving dealer search
- Authentic DGSHAPE products and services
DGSHAPE A Roland DG Group Company
Roland DG Group Company has been the benchmark for advanced machine manufacturing for over 40 years, thanks to its practical and reliable technology with unmatched support.
DGSHAPE continues and enhances this legacy, making it easier and more effective for laboratories and clinics to produce high-quality, cost-effective dental prosthetics.
This post is also available in: Global Deutsch Français Italiano Русский Español


